Polystyrene insulation adhesive: 220 Fibered Emulsion (Dampproofing) is a water-based asphalt emulsion that is 100% compatible with polystyrene insulation or protection board. Proceed with second coat at a rate of 2 to 3 gallons per 100 sq. Smooth out all wrinkles, making sure there is no trapped air underneath the fabric. Apply 31 Fiber Glass Membrane or 34 Asphalt Cotton Fabric over the wet coating, overlapping all edges. (First coat must be allowed to dry prior to the application of the second coat.)įabric reinforced dampproofing: Apply one coat of 220 Fibered Emulsion (Dampproofing) at a rate of 2 to 3 gallons per 100 sq. If applying two coats, each coat should be 2 to 3 gallons per 100 sq. (First coat must be allowed to dry prior to the application of the second coat).īelow-grade dampproofing (interior, exterior and cavity walls): Apply one coat of 220 Fibered Emulsion (Dampproofing) at a rate of 4 to 6 gallons per 100 sq. Equipment manufacturer should be consulted for more complete information.Ībove-grade dampproofing (interior and exterior cavity walls): Apply one coat of 220 Fibered Emulsion (Dampproofing) at a rate of 4 to 6 gallons per 100 sq. Apply at the rate of 4 to 6 gallons per 100 sq. SPRAY APPLICATION: Utilize a standard heavy-duty spray pump using heavy duty guns and nozzles. Cover all slots, joints and grooves and apply into all chases and corners.īRUSH APPLICATION: Apply with a wide fiber brush at the rate of 4 to 6 gallons per 100 sq. ![]() ![]() Coating should be continuous and free of pinholes and holidays. If applying two coats, allow the first coat to dry. Apply 220 Fibered Emulsion (Dampproofing) in one coat. Repair all cracks and holes with 220 Fibered Emulsion (Dampproofing) and 31 Fiberglass Membrane or 34 Asphalt Saturated Cotton Fabric, before applying the surface coating.ĪPPLICATION: 220 Fibered Emulsion (Dampproofing) is easily applied by brush, roller or spray equipment. Dry surfaces may be dampened with water before application. SURFACE PREPARATION: Surface should be free of oil, grease, dirt, laitance and loose material.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |